Port & marine

Slewing rings for continuous duty at the quay

Ship unloaders, stackers, reclaimers and deck cranes run three shifts a day for twenty years. Here the ring is not sized on peak load but on the fatigue life of the raceway under constant rotation.

Continuous rotation changes the design

A crane ring that turns a few times an hour can be sized on static capacity. A stacker-reclaimer ring that turns continuously cannot: the raceway sees millions of load cycles per year, so the structure and the hardened depth are chosen for fatigue life instead.

  • Three-row roller as the default above 2 m diameter
  • Hardened depth specified against the actual load cycles
  • Grease channels positioned for relubrication without dismantling

Salt air and dust

Coastal terminals combine salt spray with abrasive dust. Standard NBR seals survive dust but not salt air at temperature, and the paint system matters as much as the seal.

  • Double-lip NBR standard, Viton for hot cargo
  • Marine paint system to your specification
  • Stainless grease nipples and plug hardware
  • Grease purge ports for wash-down routines

Replacement without a crane-out

Split rings let a bearing be replaced around an existing column, which removes the need to dismantle the upper structure. It is the single most requested modification for port retrofits.

Send the machine and the duty cycle

Terminal, machine type, ring diameter and annual operating hours are enough for a first life estimate and a proposal.