SP-I

SP-I light duty spur gear slew drive

Spur gear reduction in a light housing: higher output speed than a worm drive at a lower cost than the heavy series.

Send a drawing or a model number and we will confirm the closest standard size.

SP-I 0229 light duty spur gear slew drive

SP-I series

SP-I series sizes

SP-I is the light duty spur gear range, from 0229 up to 1091. Low backlash, low profile, and the usual choice for solar trackers and small aerial platforms.

SP-I 0229 light duty spur gear slew drive
SP-I 0229SLEW DRIVE
SP-I 0311 light duty spur gear slew drive
SP-I 0311SLEW DRIVE
SP-I 0411 light duty spur gear slew drive
SP-I 0411SLEW DRIVE
SP-I 0541 light duty spur gear slew drive
SP-I 0541SLEW DRIVE
SP-I 0641 light duty spur gear slew drive
SP-I 0641SLEW DRIVE
SP-I 0741 light duty spur gear slew drive
SP-I 0741SLEW DRIVE
SP-I 0841 light duty spur gear slew drive
SP-I 0841SLEW DRIVE
SP-I 0941 light duty spur gear slew drive
SP-I 0941SLEW DRIVE
SP-I 1091 light duty spur gear slew drive
SP-I 1091SLEW DRIVE

Technical data

Specification range

ParameterRangeRemarks
Output torqueto 4 kNm
Ratio10:1 – 40:1
Efficiencyabove 90%Per stage
BrakeRequired to holdCustomer supplied or integrated
ProtectionIP65
InputMotor with brake and encoder
SP-I 0311 light duty spur gear slew drive

Structure

What the structure gives you

A spur gear stage transfers torque with much higher efficiency than a worm. The trade is that it is not self-locking, so a brake is required to hold position.

  • Higher output speed than a worm drive
  • Efficiency above 90 per cent
  • Light housing for cost-sensitive projects
  • Brake and encoder interface prepared
  • Compact ring diameter

Typical equipment

Light industrial turntables, packaging machinery, small positioners and display rotation under load.

Options you can add

  • Integrated brake
  • Encoder adapter
  • Custom input flange
  • IP66 sealing

Send a drawing for the SP-I

Outside diameter, bore, mounting holes, gear module and the load case are enough for a quote. If you are replacing an existing ring, the old part number also works.