SP-M
SP-M medium duty spur gear slew drive
The general-purpose spur drive: more torque than the light series, still compact enough for machine mounting.
Technical data
Specification range
| Parameter | Range | Remarks |
|---|---|---|
| Output torque | to 18 kNm | |
| Ratio | 20:1 – 100:1 | |
| Efficiency | above 88% | Two stages |
| Protection | IP65 | |
| Input | Motor with brake | |
| Encoder | Output side optional |
Structure
What the structure gives you
A two-stage spur reduction in a cast housing drives the ring through a hardened pinion. It is the standard choice where rotation is frequent and a brake is available.
- Higher torque density than a worm drive
- Suitable for frequent rotation
- Two-stage reduction in one housing
- Hardened pinion and ring teeth
- Brake and encoder interface
Typical equipment
Industrial turntables, machine tool rotation, positioners and construction equipment rotation drives.
Options you can add
- Output encoder
- Integrated brake
- Custom flange
- Hardened teeth for high cycle counts
Send a drawing for the SP-M
Outside diameter, bore, mounting holes, gear module and the load case are enough for a quote. If you are replacing an existing ring, the old part number also works.