Problems Needing Attention For Lubrication Of Angular Contact Ball Bearings

What is angular Contact Ball Bearing
Angular contact ball bearings mainly bear large unidirectional axial loads, and the greater the contact Angle, the greater the load bearing capacity.The cage material can be steel plate, brass or engineering plastic, and the molding method can be stamping or turning, depending on the bearing form or the different use conditions.Other products include combined angular contact ball bearings, double row angular contact ball bearings and four point contact ball bearings.
Characteristics of angular contact ball bearings
Angular contact ball bearings can bear radial and axial loads at the same time.It can work at high speed.The larger the contact Angle, the higher the axial bearing capacity.
Application of angular contact ball bearings
Single row angular contact ball bearings are mainly used in machine tool spindles, high frequency motors, steam turbines, centrifugal separators, small car front wheels, etc. Double row angular contact ball bearings are mainly used in oil pumps, air compressors, all kinds of transmission, etc.

Problems needing attention for lubrication of angular contact ball bearings
The installation of angular contact ball bearings must be carried out under dry and clean environmental conditions.Before installation, carefully check the processing quality of the matching surface of the shaft and the shell, the end face of the shoulder, the groove and the connecting surface.All mating surfaces must be carefully cleaned and burred and the raw surface of the casting must be removed from molding sand.
1.Rotation test should be carried out after angular contact ball bearings are installed. First, they should be used for rotating shaft or bearing box. If there is no abnormity, they should be operated at low speed and without load by power.
The operation test is normal before delivery.
2. When installing angular contact ball bearings, drilling, grooving, chamfering and end face on imported bearings are not allowed.Otherwise, it is easy to cause the deformation of the imported bearing ring, affecting the accuracy and life of the bearing. At the same time, the metal cut off is easy to enter the working surface of the bearing, accelerate the wear of the raceway and rolling body, and cause premature damage to the bearing.
3. When installing angular contact ball bearings, the pressure should be added to the end face of the ring with interference fit installed, that is, when mounted on the shaft, the pressure should be added to the end face of the inner ring of the bearing.
When loaded into the bearing seat hole, the pressure should be added to the end face of the outer ring of the imported bearing.Transfer pressure through the rolling body and hold is not allowed.
The price of angular contact ball bearings
The price of angular contact ball bearings is affected by many factors such as market, material, market and so on. If you want to know the specific price of angular contact ball bearings, please contact us to make enquiries.
Supplier of angular contact ball bearings:BMB Bearings
BMB Bearings is the complete one-stop supplier of OEMs and wholesalers purchasing high-precision, miniature ball bearings, industrial ball bearing related products, as well as related professional services, including world-class engineering and design. If you have any need, please feel free to contact us .